Close
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Wolf Eyes

    Wolf Eyes Nite Hunter torch

    $144.60
    The Wolf Eyes NightHunter is a 4 level (high, medium, low and strobe) torch with an adjustable aspheric lens (like a magnifying glass). This gives it a narrow beam. It also has a tailcap which allows the included tape switch to be screwed in, whilst also allowing for standard use with a push button switch. The adjustment for the beam is via screw focussing system, giving much better tolerance to large calibres than a push pull focussing adjustment. Range It is difficult to quote a range as it has so many variables, the age of ones eyes, the objective size of the scope, the amount of light you require for target ID, etc. A reasonable expectation is 220 metres or so, we tested this unit casually at that distance and had no problems.
    SKU: TOHHWENH

    Lumens: 1210 lumens
    Throw: 200 metres
    Length: 150 mm
    Beam Type: Aspheric – spot adjustable to flood

     

    Light Output and Beam Pattern

    The NiteHunter torch with its large aspheric head and slightly greater distance than usual between LED and aspheric lens (magnifying glass) concentrates every one of its lumens into it’s spot to provide a good beam out to 225 metres. This can be adjusted back to flood. There is a high beam, medium and low beam.

    TTT and Construction
    Like all of the Wolf Eyes LED Hunting Torches the NiteHunter is built around the brass TTT – Thermal Transfer Tube. The Thermal Transfer Tube has three benefits, it strengthens the total body structure, it enhances electrical conductivity and most importantly drags damaging heat away from LED. If overheated LEDs suffer permanently reduced output.

    The rest of the body is made from aircraft grade aluminium which is then low temperature (-20o C) Hard Anodized tactical black.

    Dual Tailcap
    The tailcap is the Wolf Eyes Dual Tailcap, which means you can use it like a regular tailcap or screw on the included tapeswitch for faster control of your light. The Dual Tailcap also features a spring in it, combined with the spring at the front of the body, the two springs contain the battery which can move but electrical contact is maintained at all times, even with heavy calibres.

    Regulation
    The NiteHunter LED Hunting Torch is regulated, meaning it doesn’t dim as the battery flattens. Torches usually dim as the battery flattens, sometimes just a little and often a lot. This is because the battery reduces in voltage as it flattens. The solution to this regulation, this increases the amperage as the voltage is reduced, so the optimum power or cuurent is always supplied to the LED.

    Rechargeable Batteries
    The Wolf Eyes LRB168A lithium ion battery (18650) supplied with the NiteHunter torch light is also used in all our other hunting torches and headlamps, giving you interchangeability. This is both an energy dense battery (meaning you only need one and so can keep the 25.4mm – 1” -standard firearm body size) and also protected for your safety.

    Cold Weather
    All Lithium Ion powered Wolf Eyes LED torches work well in cold weather, the NiteHunter hunting flashlight being rated from -20o C to +60o C.

    Australian Approved Charger
    The charger with your Wolf Eyes LED Torch is Australian Approved, meaning that you can feel safe using it and all your insurances will apply

    Write your own review
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    • Only registered users can write reviews
    *
    *
    *

    Lumens: 1210 lumens
    Throw: 200 metres
    Length: 150 mm
    Beam Type: Aspheric – spot adjustable to flood

     

    Light Output and Beam Pattern

    The NiteHunter torch with its large aspheric head and slightly greater distance than usual between LED and aspheric lens (magnifying glass) concentrates every one of its lumens into it’s spot to provide a good beam out to 225 metres. This can be adjusted back to flood. There is a high beam, medium and low beam.

    TTT and Construction
    Like all of the Wolf Eyes LED Hunting Torches the NiteHunter is built around the brass TTT – Thermal Transfer Tube. The Thermal Transfer Tube has three benefits, it strengthens the total body structure, it enhances electrical conductivity and most importantly drags damaging heat away from LED. If overheated LEDs suffer permanently reduced output.

    The rest of the body is made from aircraft grade aluminium which is then low temperature (-20o C) Hard Anodized tactical black.

    Dual Tailcap
    The tailcap is the Wolf Eyes Dual Tailcap, which means you can use it like a regular tailcap or screw on the included tapeswitch for faster control of your light. The Dual Tailcap also features a spring in it, combined with the spring at the front of the body, the two springs contain the battery which can move but electrical contact is maintained at all times, even with heavy calibres.

    Regulation
    The NiteHunter LED Hunting Torch is regulated, meaning it doesn’t dim as the battery flattens. Torches usually dim as the battery flattens, sometimes just a little and often a lot. This is because the battery reduces in voltage as it flattens. The solution to this regulation, this increases the amperage as the voltage is reduced, so the optimum power or cuurent is always supplied to the LED.

    Rechargeable Batteries
    The Wolf Eyes LRB168A lithium ion battery (18650) supplied with the NiteHunter torch light is also used in all our other hunting torches and headlamps, giving you interchangeability. This is both an energy dense battery (meaning you only need one and so can keep the 25.4mm – 1” -standard firearm body size) and also protected for your safety.

    Cold Weather
    All Lithium Ion powered Wolf Eyes LED torches work well in cold weather, the NiteHunter hunting flashlight being rated from -20o C to +60o C.

    Australian Approved Charger
    The charger with your Wolf Eyes LED Torch is Australian Approved, meaning that you can feel safe using it and all your insurances will apply